| Customization: | Available |
|---|---|
| Application: | High-performance Transducer, Three Phase Transducer, General Transducer, Single-phase Transducer, High Frequency Converter Transducer, Soft Starter |
| Output Type: | Triple |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Item | Item Description |
| Input Voltage | Three Phase 380V-15% ~ 415+10% 50/60Hz |
| Adaptive Motor | Squirrel-cage three-phase asynchronous motor |
| Starting Times | It is recommended not to exceed 20 times per hour. |
| Control Mode | 1) Operation panel control; |
| 2) Operation panel + external control; | |
| 3) External control; | |
| 4) External control + COM control; | |
| 5) Operation panel + external + COM control; | |
| 6) Operation panel + COM control; | |
| 7) COM control; | |
| 8) No start or stop operation. | |
| Start Mode | 1) Current-limiting start; |
| 2) Voltage ramp start; | |
| 3) Kick start + current-limiting start; | |
| 4) Kick start + voltage ramp start; | |
| 5) Current ramp start; | |
| 6) Voltage current-limiting double closed-loop start. | |
| Stop Mode | 1) Soft stop; |
| 2) Free stop. | |
| Protective Function | 1)Open loop protection for external instantaneous stop terminals; |
| 2) Over-heat protection for soft starter; | |
| 3) Protection for too long starting time; | |
| 4) Input open phase protection; | |
| 5) Output open phase protection; | |
| 6) Unbalanced three-phase protection; | |
| 7) starting over current protection; | |
| 8) Running overload protection; | |
| 9) Under voltage protection for power voltage; | |
| 10) Over voltage protection for power voltage; | |
| 11) Protection for fault parameter setting; | |
| 12) Load short circuit protection; | |
| 13) Auto restart or incorrect wiring protection; | |
| 14) Incorrect wiring protection of external control stop terminals. | |
| Place to be used | Indoor location with good ventilation free from corrosive gas and conductive dust. |
| Altitude | Below 3000M. It have to rise the rate power when the altitude is more than 3000M. |
| Ambient Temperature | -30~+55ºC |
| Ambient Humidity | ≤90%RH without dew condensation. |
| Vibration | <0.5G |
| Protection Class | IP20 |
| Cooling Pattern | Natural wind cooling. |
| Main Circuit Operating Voltage: | AC380V(±15%) |
| Main Circuit Operating Current: | 22A~1200A |
| Main Circuit Frequency: | 50~60Hz (±2%) |
| Soft Starting Rise Time: | 2~60s |
| Soft Stop Time: | 2~60s |
| Current Limiting Multiple: | 1.5~5.0 Ie (where Ie refers to rated current) |
| Initial Voltage: | 30%~70% Ue (where Ue refers to rated voltage) |
| Cooling Method: | Natural Cooling / Convection Cooling |
| Communication Method: | RS485 Serial Communication |
| Starts per hour: | ≤10 times/hour |
| Rated Power | 11/15/18.5/22/30/37KW | Rated Power | 45/55/75KW | Rated Power | 90/115/132/160KW | ||
| Rated Current | 22/30/37/44/60/75A | Rated Current | 90/110/150A | Rated Current | 180/230/264/320A | ||
| Installation Dimension | 13.3*24.9CM | Installation Dimension | 13.4*24.6CM | Installation Dimension | 19.7*37.9CM | ||
| Hole intermediate distance | 9*11CM | Hole intermediate distance | 9*11CM | Hole intermediate distance | 9*11CM | ||
| Mounting hole diameter | M8 | Mounting hole diameter | M8 | Mounting hole diameter | M8 | ||
| Soft Starter Size | 14.5*15.7*27CM | Soft Starter Size | 14.8*16*27.5CM | Soft Starter Size | 26.1*19.4*40.2CM |
| Rated Power | 185/200/220/250/280/320KW | Rated Power | 350/400KW | Rated Power | 450/500/630KW | ||
| Rated Current | 370/400/440/500/560/640A | Rated Current | 700/800A | Rated Current | 900/1000/1200A | ||
| Installation Dimension | 26.2*47.4CM | Installation Dimension | 26.5*51CM | Installation Dimension | 26.5*51CM | ||
| Hole intermediate distance | 9*11CM | Hole intermediate distance | 9*11CM | Hole intermediate distance | 9*11CM | ||
| Mounting hole diameter | M8 | Mounting hole diameter | M8 | Mounting hole diameter | M8 | ||
| Soft Starter Size | 29*24.2*55.6CM | Soft Starter Size | 33*24.3*58.1CM | Soft Starter Size | 41*24.2*67CM |
We provide reliable after-sales support to ensure your inverter operates efficiently.
Our services include:
1. Technical Support: Available 24/7 for installation, troubleshooting, and operational guidance.
2. Warranty: Coverage for manufacturing defects and component failures.
3. Maintenance: Regular check-ups by certified technicians to keep your inverter in top condition.
4. Repairs: Quick and efficient repair services using genuine parts.
5. Training: User manuals and training sessions for proper operation and maintenance.
6. Spare Parts: Easy access to a wide range of spare parts for timely replacements.
Your satisfaction is our priority. Contact us for any assistance with your inverter.
OEM Services:
1. Logo
Please offer us your own high resolution logo in JPG format, there should be two colors at most in the logo and there should be no gradient effect in the logo.
2. Label
Please offer us your own model numbers.
3. Manual
Please offer us the finished manual file that can be printed directly.
Q1: What's The Advantages Of Your Products?
A1: We are a factory, so we have a number of production lines and first-class equipment and machines whichmeans we have hundreds of specifications. And also the company has the right to import and export, first-class quality, excellent service and praise, by domestic and foreign customers.
){kind=link}